Year: 2011
by Chapter President, Ricky Bivins
Hello Everyone. April Showers will Drown May Flowers…WHAT. That is not how the little ditty goes but it seems to be the case. Those same “showers” have changed a lot of travel plans of late. Some of those plans were in place for our very own members. The Rare Mileage Trips over the Illinois Central i.e. Canadian National via Paducah KY and to Princeton KY across the new Tennessee River Bridge at Kentucky Dam being one of them. Many freight trains are being diverted as well. I have seen a lot of Tri-level Auto-rack cars on the Henderson Subdivision at Mortons Gap KY. These normally run on the Texas Line between Henderson KY and Louisville KY. Not to mention some BNSF traffic. But fear not, the rains will abate, rivers will subside and rail traffic will resume.
The April meeting was very informative if you missed it. There is a lot going on at the National level of our organization. Many changes have taken place and more to come. Wallace Henderson reported many of the changes are being brought on by simple economics. The NRHS national level officers and representatives have been faced with rising cost of travel to attend the Spring and Fall board meeting and the National Convention. If left un-addressed, these rising cost will undermine the streighnth and effectiveness of said board meetings. This will weaken our National Organization and eventually affect our local Chapter as well. Wallace pointed out that he has over the years spent an average of $10,000 per year OUT OF HIS POCKET to attend these very same meetings. I was shocked by this yet it is easy to see. This years Convention is on the West Coast….The cost from our mid-west location would be staggering. These costs and continued effectiveness is the very things out National Officers are reviewing and making changes too. Wallace will have a very in-depth review in the coming months. Please make it a point to pay attention. It IS important to our Chapter and the over all health of our National Organization.
If you missed the April meeting, you also missed the conclusion of Dr. Fred Ripley’s 1980’s era slide coverage of the former Pennsylvania Railroad in Western Pennsylvania and Eastern Ohio. I find this type of program to be very informative and very one on one. I like the idea of asking questions of the author and/or photographer about the location, time or element of the program. It is not very rewarding to ask the DVD player!
This, as you might expect, brings me to make a point…again! There should be one or two dates left for the year to sign up for a program or refreshments. SO…it is not too late to do so.
The May meeting is in Hopkinsville KY, hosted by our Hop’town members. Try to find time to be there, I assure everyone of a good time of trains, rail history and fellowship.
Rick Bivins
Charolais Coal Switchers Scrapped by Ricky Bivins
Our beloved ex-Illinois Central Railroad SW-9 switchers at St. Charles KY are gone. High scrap prices and a level of aggravation were key factors in Donald Bowles decision to cut them up. As sad as it is to us rail fans, I must come to Donald’s defense. Here are the factors or reasons Donald decided to dismantle the units.
Several weeks ago a local Kentucky State Trooper was east bound on Hwy 62 at St. Charles. He saw two men removing parts from #1247 which was the orange and white unit used as a parts store for the two operating units. The Trooper was suspicious first because they had only small tools and second their car, not a truck but a car was parked by the road…not inside the gate. He called Donald’s office, knowing Don and his secretary Jill, he ask if Donald had anyone at the facility removing parts etc. Jill called Don in Florida, Don called Luke whom I will get to in a moment. Neither Don nor Luke nor Jill knew of any reason someone should be there removing parts from the locomotive(s). The Trooper called for back up and the arrest was made.
Luke is Donald’s Nephew; Luke is a computer technician turned salvage dealer. Donald is helping Luke with his Pull a Part style salvage yard which will be located on Donald’s former mine sight at St. Charles. After surveying the damage to #1247 Donald told Luke to finish cutting it up and use the money to further his salvage yard operation. Then Donald told Luke to cut up #1250 which had suffered a busted piston years before we went down to “play” with #1249. At this point #1249, “our Locomotive for a few years”, was spared.
Having worked for Donald for many years, I know him well; I know how he thinks for the most part. First, one does not go to Donald with a problem for him to answer, one goes to him with an answer to a problem for him to approve. If I were to go to him for an answer, he would become very agitated. I was hired to think as well as work. Usually he would approve my “answer” or tell me what he wanted me to do if he did not approve my way. Second, Donald is an aggressive man, he does not wait for things to happen, he makes things happen. He is almost always correct and one does not second guess him. If I wanted or needed something for the airport or personal….approaching him was something that had to be done with precision, and more than once. But at the same time if he becomes irritated by one’s actions, that person can toss the idea or need out the window. If he is not kept informed…same result. The key point here is “balance”.
As an example, when I started building my house I ask to use some equipment from his shop. A Bobcat skid steer loader and a Hitachi backhoe. Donald graciously allowed my use of same, at his expense. While using the Bobcat I cut a tire beyond saving. I called the tire service company, had them replace the tire etc. The cost was several hundred dollars. Don only mentioned that he had a spare tire at the shop that could have been used. But he was not upset with me because I didn’t know about the spare tire. He seamed pleased that I simply “fixed the Problem”. Donald Bowles is a generous man.
The locomotives at St. Charles were tools to him. Just as a D-11 Caterpillar tractor or HaulPak off road truck. Once they had served out their usefulness….they were of no value to him. However…I had for the past few years talked with him about saving one of the units and donating it to KRM. He had agreed to this and we even discussed using his lowboy truck to haul it to New Haven KY! I informed Donald of the Museums WWII era MRS-1 that was in need of a prime mover and another locomotive that would benefit from the other operating parts while the unit itself would be cosmetically restored. Donald even told Luke not to cut up the 1249 because “it is going to a museum”.
And then one man steps in and changes everything. While Luke was working on the two units to be scrapped a man drives up and informs Luke he has talked to Donald about parts from the locomotive. Luke said this guy had the manners of a high pressure car salesman. Luke, knowing Donald could very well have talk to some one, called Donald on the phone. Don said he had talked to the man before etc. While Luke is on the phone with Donald, this guy is yelling “I have cash money” and spitting out dollar figures etc. Donald had had enough. He told Luke while the guy was spatting off “do I look like a guy that needs cash money”? Luke is in the middle of this and knows full well the whole salvage yard thing could collapse at any moment. Don tells Luke “look over your right shoulder”. Don was sitting just over Daniel Boone hill….hovering in the Helicopter! Don tells Luke to “tell that blankity blank to get off my blankity blank property and to cut that blankity blank locomotive up”! And so it came to pass.
I was involved in the whole ordeal, I gathered up the paper work for the units to forward to other scrape dealers for quotes etc. I did this on my own time as I no longer work for Donald. I felt I owed him something for the many times he helped me. Some of the parts were “parted out” and will be reused. I was surprised to learn, the prime movers were of little value, even in running order. The crank shafts had the most value. The electrical cabinets were hit hard by the copper worms i.e. thieves. And at local scrap prices of $225.00 per ton, at 124 tons each…. $27,000.00 plus times three units, this equates to a sizable sum of money. Money Donald gave to Luke to help him get started in business, which is just the type of thing Donald would do.
Donald wants Luke to do well so he decided to help. One man in just a few minutes was able to turn years of timed effort into a frustration for Donald. Run out equipment to Donald has little or zero value. These were all factors in Donald’s decision to cut them up. But most of all Donald is in control of Donald and Donald’s estate. And what he says goes.
I tried and almost succeeded at getting one of them saved. I can rest knowing all that could have been done, was done.
As a side note, I ask Donald if I could have a souvenir from one of the locomotives. He said “get what ever you want, and tell Luke I said so”! I did and Luke even helped.
From Railway Age (www.railwayage.com)
Submitted by Chris Dees
GE Transportation said Friday that it intends to open a new 900,000 square foot locomotive manufacturing facility in Fort Worth, Tex., “to meet accelerating global demand.” GE said it will invest up to $96 million in the new plant and will create more than 500 new high-tech manufacturing jobs.
At the same time, GE Transportation also will expand its manufacturing workforce at its Erie, Pa., plant by hiring an additional 250 workers.
“GE Transportation is experiencing strong U.S. and global growth because of its technical leadership and we need to increase our manufacturing capacity and flexibility,” said GE Chairman and CEO Jeffrey Immelt. “This new state-of-the-art plant in Fort Worth, Texas will produce the world’s most advanced locomotives and transportation products, expand our service and repair capability, and create hundreds of new high-tech manufacturing jobs.”
“We are excited to expand our operational footprint in the United States to better serve our customers,” added Lorenzo Simonelli, President and CEO of GE Transportation. “We see robust growth in the U.S. and around the globe. A new site will help us to effectively respond to the cyclical demand in the transportation industry and to strengthen our overall position.”
The State of Texas will commit up to $4.2 million in incentives toward the project through the Texas Enterprise Fund (TEF). GE Transportation said its new manufacturing site in the U.S. will complement its existing manufacturing operations in North America. The company noted it has recalled approximately 800 production workers at its Erie manufacturing facility since late 2010 and announced 450 new jobs since April (including those announced Friday). GE Transportation operates at more than 50 GE and customer facilities in the United States.
http://www.railwayage.com/breaking-news/ge-to-open-texas-locomotive-plant-3142.html
Those of us fortunate enough to wander down to St. Charles, KY, on the old IC main between Dawson Springs and Nortonville, in the last few years got a treat of which many railfans only dream. We were granted permission to operate an EMD SW9 on the Charolais Coal Prep Plant yard tracks which paralleled the afore mentioned IC line. Owner Don Bowles allowed us access as long as we took care of the property. But time, land-locked trackage, and high scrap prices have won the battle and sent the three units into our memories. Doyle Massey and Keith Kittinger (pictured) got some night shots of these beasts of burden as scrappers removed usable engine parts before being cut up.
I personally thank Don, Keith, Ricky, and others who made it possible for us to “play” with the real thing for a while. I have photos of my son Liam and friends operating the machines on a mile of real track. It was fun while it lasted! Bill Thomas, editor
Saturday, August 13, 2011, 1:00 pm to 10:00 pm and Railroad Show and Sale in the Rotunda 10:00 am to 5:00 pm
Cincinnati Union Terminal, 1301 Western Avenue, Cincinnati, Ohio
Join us at this historic art deco railroad terminal to escape the summer heat and enjoy a day of high quality railroad photography. There will be twelve multimedia digital and dual-projector slide presentations, all set to music. The programs will run from 1:00 – 10:00 pm, with a break for dinner (on your own) approximately from 4:30 – 7:00 pm. Admission is $20.
More info on the web at http://cincinnatirrclub.org/Summerail/index.shtml
Amtrak is calling “all kids—young and old” to join the coast-to-coast celebration of train love. On Saturday, May 7th, hundreds of National Train Day festivities are taking place across the country including four major events in Washington, DC, Philadelphia, Los Angeles and Chicago. At each you can enjoy: Free live entertainment, Interactive and educational exhibits, Kids activities, Model train displays, Tours of Amtrak equipment, freight and commuter trains, and of notable private railroad cars, and much more. You can attend an event near you, host one of your own, or participate online. Start the celebration today at http://www.nationaltrainday.com
by President, Ricky Bivins
Hello once again railfans. I hope everyone enjoyed the March meeting and found it informative. Wally picked a good video with the Upper Mississippi Railroads. That area looks to be a Railfans Mecca. Did you know the “term” railfan was coined by the late David P. Morgan, long time editor of Trains Magazine? I have been giving some thought to “Railfanning” lately and remembering many outings taken by local members of our chapter. Some of these events I was surprised to recall were more that 20 years ago. High speed runs in a van with the side door open while photographing one of Southern Railways many steam powered fan trips. And many jaunts up to Southern Indiana to catch a glimpse of the former Yankeetown Dock Corporation’s EMD SD-38’s hauling coal and of course their little Fairbanks Morris opposed piston switchers chugging around. Not to mention the ALCO Alligators!
Several of our members past and present and a few that have passed on made many MANY trips to Southern Illinois to see the MoPac, BN (Frisco) and of course UPRR around Chaffee, Scott City and Gorham. And of course local trips that never took us out of Hopkins County. And how about Central City KY…back when the Illinois Central and later ICG railroad ruled the roost?
So what is the point, (You knew I had a point to make didn’t You)? How many of us have photo’s, video, audio or slides of those many trips? Where are they? Would you want to share them? I would like to take up the cause as mentioned before of growing and managing the archive of Western Kentucky rail scenes we have managed to preserve. Steve Miller has agreed to take on the task of managing the archive in Jim Pearson’s place. I will have to leave it up to them as I am not at all versed on photo management via computer. But I know it will be in capable hands.
So, If one has something of interests in the way of photo’s, maps, history, audio, video, slides or “GASP” FILM make it known and make it available. Who knows, some day our very own archive could benefit the next group of “Railfans” as to “how it was back then”!